Same case but with a little different. I had S3420GP and Seagate Baracuda ST3000DM001 3TB. This 3TB just hook up to an existing windows 2003 Standart Edition as data disk (or in other term, as slave disk). In BIOS, the hdd not detected but when i run into "Intel Deployment Assistant (ver 3.6), my 3TB only detected as 763893 MB.
I have download "S5500_Windows_4_5.zip" file ( Download Center), open the "ofu_userguide_r0_2.pdf", read it and then base on that pdf, the zip file i extract into d:\, open command prompt window, go to the extraction file (ex: d:\S5500 Window\Windows_OFU970_B21\OFU\windows) and run "install.cmd".
Not working because the command is not correct, it's said:
USAGE: Install [Platform]
The Platform is the number corresponding to different platforms.
S5000 = 1, SHW40 = 2, SE752 = 3, SBX44 = 4, S3000 = 5, SFC4UR = 6, S3200 = 7, SB
LUES = 8
Example:
Install 3
So, Because i don't know my S3420GP is on what platform, then i choose no 7, because i think my S3420GP is still on one family with S3200.
Then i run "install 7", the progress quiet OK, and in the end, it said the server must reboot unless for Win PE.
After reboot, still following the guide from "ofu_userguide_r0_2.pdf", then i ran "flashupdt -u /tmp/flashupdt.cfg".
Not working because the system can't found flashupdt.cfg.
I'm very sure that file is not on the extracted file nor in C:\ directory.
And then i search in http://support.intel.com as suggested in "ofu_userguide_r0_2.pdf", but with no result.
Any solution so my 3TB can be used properly? Many thanks..