Re: GPIO Driver
Greetings LifuWe are currently researching on this in order to give you a more accurate response. Regards, Juan Pablo
View ArticleClik here to view.
Re: HD 4000 Graphics Issue
I'm sorry Joe but I can't accept your answer....j/kActually this issue resolved itself-I don't know why but everything is filled in now. How important is it that these Intel drivers are the "generic"...
View ArticleRe: How to connect Intel Galileo to PC as USB HID
The document is listing the USB capabilities the Galileo can provide but without the software libraries it would be difficult to use those capabilities. The mouse and keyboard libraries are not working...
View ArticleRe: Boot from SD on Crosshill show RECOVERY
Hi time1234, Do you still need help with your BSP build?Can you provide the message that is displayed when your build fails? Regards,Intel_Jesus
View ArticleRe: disconnect USB 5V In?
Hi Tony, Yes, it is possible to modify your board by removing a certain component which will disable the board to be powered by USB. I don't advise people to modify their board but if someone need to...
View ArticleRe: DMA in Galileo?
Hi AK51, Hardware interrupt is not supported on Galileo. Regards,Intel_Jesus
View ArticleRe: Galileo Minicom issues
If I remove the Arduino IDE support from the Galileo Board (just having the yocto linux image on sdcard) will it work? If so, how do I remove the Arduino IDE platform?
View ArticleGALILEO - Arduino blink sketch, claims: no such device or address
Arduino Blink sketch claims:C:\Intel_Galileo_Arduino\Arduino-1.5.3/hardware/arduino/x86/tools/izmir/clupload_win.sh line 24: /dev/ttyS2: no such device or address-com port: 4 , Arduino 1.5.3 lastest...
View ArticleRe: Arduino WiFi ConnectWithWEP sketch, claims: no such device or address
Hi 4J1a, Are you booting from the SD card? The SD card is mandatory for Wi-Fi, since the driver is not available from the SPI image. Take a look at the Intel® Galileo Getting Started section 11 for...
View ArticleRe: GALILEO - Arduino blink sketch, claims: no such device or address
I removed the SD Card and the WIFI card and get the same error running the Blink sketch.The blink sketch ran, and blinked, but now I get the error.The only real change was upgrading the 1.5.3 to the...
View ArticleRe: GALILEO - Arduino blink sketch, claims: no such device or address
In the line where the error occurs, I find the way the / and \ are used irregular. Would slash and backlash be causing the...
View ArticleClik here to view.
Re: GALILEO - Arduino blink sketch, claims: no such device or address
Hi 4j1a, The "Arduino-1.5.3" should be in the root directory of your C drive due to a know issue with pathnames too long. Another thing to check is that the right port is selected or try switching to a...
View ArticleRe: Linux hanging at Initrd (BSP 1.0)
I haven't gone back to try again for awhile. I did get a JTAG pod so I could try to do some debugging on it, but time's been tight. I'm pretty sure I've got the latest firmware image (whatever one...
View ArticleRe: Galileo Minicom issues
Hi,I just want to transmit data serially. I want to avoid SSH.I think the Arduino uploads data via Y-modem. I am looking for a method to transmit cross-compiled file serially on to the Galileo....
View ArticleRe: Does the Intel USB 3.0 driver for 7-series chipsets support xHCI hand-off?
I appreciate you taking the time to find out, thank you most kindly
View ArticleRe: Installing mysql on galileo
Hi sunilputturI just wanted to know if you still need help with this or if Alex’s suggestion answered your question. If this is the case remember you can mark his reply as correct or helpful.Regards...
View ArticleRe: Linux hanging at Initrd (BSP 1.0)
Hi Krampus, The reason i thought it might be your firmware was because i had a similar issue with a build that would get hanged at the same message, and doing the firmware update fixed it. [Linux-EFI,...
View ArticleRe: Intel Utility & Win7 Diagnostics report different wireless adapters
Kevin, Thank you for the response and offer to help. However, you failed to address my question: Why would the official Intel wireless adapter identification and update tool misidentify the adapter in...
View ArticleRe: Re: Enabling Wi-Fi Direct in wpa_supplicant package
Yea I figured. Alright, I updated to the 1.0.0 FW, IDE and LSB image (using Sergey's instructions for building the LSB image: Intel Galileo - Building Linux Image - Malinov Family Web Presence). I...
View ArticleRe: Intel Rapid Start's suspend state fails once after computer has been...
It was 64-bit. That is the only way for the system to recognize more than 4GB of RAM.
View Article