Unable to execute sketch when booting on SD card
I have the 0.7.5 image downloaded onto the SD card with latest firmware update. The board boots fine and I could even set up networking eth0 and now ssh into the board.However, I have one problem. I am...
View ArticleClik here to view.
Re: Cryptography libraries for Intel Galileo
Tenych, I have an sha1 arduino library I adapted for galileo as I am trying to build a library to comunícate with twitter (and Oauth is giving me a hard time by the way). Let me know if it may interest...
View ArticleRe: Problem with my Graphic drivers version
The Windows Experience Index (WEI) rating for "Graphics" (or any of the categories) is considered by some to not be an actual indicator of performance. Since your gaming graphics did not change, I...
View ArticleRe: Edison
It looks like some info on Edison is available on https://www-ssl.intel.com/content/www/us/en/do-it-yourself/edison.html
View ArticleRe: Unable to execute sketch when booting on SD card
I guess updating to a more recent SD card image fixes the issues. For now: What about when you ssh into the SD card image and try to manually start the /sketch/sketch.elf - what errors do you get?what...
View ArticleRe: No sound after installing Intel HD4000 drivers
Well I'm only guessing now, but I wonder if the monitor needs to be in HDMI mode to get the signal. Can you switch the input modes on the monitor to see if one of the others will pick up the signal?...
View ArticleRe: DX79SR and USB 3.0 Firmware Updates
Hi Kevin, What time frame can one expect on solution and if I need to exchange my board how would I go about this? Kind Regards Simeon
View ArticleRe: How to install Common Unix Printing System (CUPS) on the Galileo?
I'm booting the Galileo board with the SD-Card Linux Image provided by Intel There is more than one version - which image did you take? sudo apt-get install does not work for the Galileo.Indeed. There...
View ArticleRe: Intel NUC 34010WYKH CIR issue
Your problem is related to the fact that removing lirc still leaves its configuration files in place for the case you need them later. In order to remove the package completely together with the config...
View ArticleRe: Intel® Wireless-N 7260 - slows
Has anybody else had any success with this? I'd like to share my 2c as I'm still seeing mixed reports on the latest drivers. I do not use Windows. I use Ubuntu both at home and at work with a series of...
View ArticleInitiating connection from the TV
Good afternoon. As a PC monitor for Windows 8.1 I use LG Smart TV. How to connect to TV from Windows 8.1 to WiDi understood simply in the Wireless Display must choose the right once to enter a...
View ArticleClik here to view.
Will the new Broadwell CPU chip support the LG1150 socket and the Z97 chipset?
Could I buy a Motherboard in this serie today and upgrade to the Broadwell CPU next year? Or should I hold off...?
View ArticleIntel NUC D34010 + Intel AC 7260HMW + Windows 8.1 64bit = Error code 10
Hi, I have an Intel NUC D34010 with Windows 8.1 64bit and everything works fine except for the Intel AC 7260 wireless card. I mounted it, installed the last drivers and my system detects the correct...
View Articleintel extreme tuning utility on dell 5737
Hi, everyone=)I have a laptop Dell inspiron 5737 with i74500u + HD 8870m.(Windows 8.1)After reinstalling windows 8.1 the intel extreme tuning utility doesnt work. My bios is A08.a have tried to use...
View ArticleRe: Unable to execute sketch when booting on SD card
I now managed to run with the latest SD image 1.0.2. Haven't gotten back to the older image to debug the issue.Also I think the sketch.elf is just not a linux executable - I tried running >...
View ArticleRe: Unable to execute sketch when booting on SD card
no, actually sketch.elf is an executable. Try "file sketch.elf". clloader is responsible for the communication with the Arduino IDE and the copying of sketch.elf to the right folder, making a backup...
View ArticleRe: MFSYS35 network modules
Thanks Dan_O. I figured out that was what we needed. I have been advised we can't get the cards so had to go with the SAS unit in the end. Do you know of any documentation on how to configure SAS...
View ArticleTransferring the file to server with URL syntax
Hi there, I have got installed mysql on intel galileo. Now I m storing some commands in a file using shell script concept and also able to run that file. The question is I want to transfer that file to...
View ArticleRe: Need scheduled wake and/or power-on in BIOS for signage
The thing is, it doesnt matter for me if my computer is shutdown or just in sleep mode. So I created two tasks in taskscheduler to set my computer into sleepmode and wake it up again in the morning.If...
View ArticleRe: Re: Galileo Ethernet WebClient
Hi aodhgan, I have just tried a few things, and it looks like the wired ethernet isn't brought up during boot, when you run the Galileo board from the built-in flash (I have tested with firmware...
View Article