Re: [Update] Galileo Gentoo Linux dd-Image freely available - comments welcome
I retry your img.please see attached gist.https://gist.github.com/Kazu-zamasu/95c9309d84d681829467do you have any advice?
View ArticleClik here to view.
Re: [Update] Galileo Gentoo Linux dd-Image freely available - comments welcome
I am working your Gentoo img! Thank you!!!But, not working USB serial and RS232 serial port. I wil try improve.
View ArticleRe: Intel DZ87KLT-75K with I7-4790K
Vladimir, I am sorry to have to tell you that the i7-4790K processor is not supported by the DZ87KLT-75K board.For a complete list of the processors supported by this board, consult this reference:...
View ArticleRe: Intel DZ87KLT-75K with I7-4790K
Please review all three of these threads, as they address the i7-4790 and the DZ87KLT-75K (if not all 87 series chipset boards).DZ87LKT-75K / "Devils Cannyon" i7 4790K compatibility ????Intel...
View ArticleGalileo BSP1.0.2 build instructions
Software Downloads - Drivers does not include the build instructions with BSP1.0.2. It only includes BSP.1.01 but with the patches. Also the Yocto BSP (1/2 and 2/2 zip files) include only the source...
View ArticleRe: Can't play BluRay discs with Intel HD 4600?
Hi RLacey, Thanks for your reply. I finally got around to downloading trial version of PowerDVD 14 and it plays my BLURay discs just fine. I actually had two free patches that upgraded my version 8 to...
View ArticleIRST RAID 0 Volume 1 Error Occured (0)
Hello, I have a problem here. Yesterday morning, when I turn on my VAIO S (VPCSA2GBX WIN 7 Ultimate) suddenly find out IRST RAID 0 Volume 1 Error Occurred (0) displayed as image attached, and I can't...
View ArticleRe: INTEL NUC DRAWINGS [3D CAD] DE3815TYBE
Hello Sylvia,I am looking for this information too because I have to design a customized case for DE3815TYBE.Could you please help provide me this additional information as well ?Thank you,
View ArticleRe: Can't play BluRay discs with Intel HD 4600?
Thanks for your reply Allan and helpful link. As you can see from the above post and my reply, the problem wasn't compatibility with BluRay but compatibility with the Intel HD 4600. Power DVD 8 was...
View ArticleRe: Intel 7260ac support 802.11k
Based on feedback on other forums, it would appear that the 'Quiet IE' field is what the 7260 is having problems with.
View ArticleD54250WYK fails to present HDMI output upon wakeup
Hi all, My D54250WYK fails to present HDMI output when started from other than powered off state.It happens with BIOS 026 and 027. This only occurs when my Pulse-Eight usb-cec adapter is connected.When...
View ArticleClik here to view.
Re: Installing mysql on galileo
Thanks for your reply AlexT_Intel, I just entered to your blog post but not able to redirect to the link which contains "devtools" image Download and Unzip it to your SD card. . Can you provide me that...
View ArticleRe: D54250WYK fails to present HDMI output upon wakeup
There's just as much possibility it's the NUC as it is the adapter.Obviously I've asked the product vendor to investigate but I suspect they will give the same comment as you and blame the NUC. I don't...
View ArticleEnabling mPlayer, vlc on galileo board
I am trying to play RTP stream on the galileo board. I built yocto-full/yocto-tiny linux builds but found that there are know vlc, mplayer or any players in these. The opkg package manager is also...
View ArticleRe: Re: I Compiled the Poky Distribution. Now what?
Thanks Alex.. that worked.. I need another help.. I dont have the R232 serial cable so I want to use the normal usb cable to ssh into the board.. when I use the arduino sketch to ssh into the board...
View ArticleDCCP847DYE powered by a 11.1v lipo battery?
Hi, I've read in other forums that users are able to power some NUC boards with 11.1 volt lipo battery? Is this specific board ( DCCP847DYE ) possible? Thank youEric
View ArticleRe: Specifying flags at compilation
I meant the environment in which you develop your code for Galileo. I believe the current version is 1.5.3. I usually compile the programs inside this environment. However, I don't know of a way to...
View ArticleRe: Intel Verilog-A FASE SATA model issue
Hi,MaxstringerI also met the same issue, "Don't know how to use Intel Verilog-A FASE model to do simulation." Do you overcome this problem?
View ArticleGaining shell access in Galileo linux enviornment
I would like to get shell/terminal access to the linux OS running on a Galileo board but have been unable to. Eventually I would like to get to the point where I can compile my own project directly on...
View Article