Clik here to view.
Re: i7 4790K temperatures
Seems to pass fine. Lower temperature than even the XTU test. According to HWMonitor, the max package power is around 60W for your ITT, while for the XTU it's around 80-90W. When you run the small...
View ArticleRe: Is the "gray NUC" (Celeron version) compatible with Windows Server 2012...
I would like to state what I did following your example as it didn't quite turn out right with your directions, maybe from the age of it. But I have a DCCP847DYE NUC and installed it in "classic mode"...
View ArticleClik here to view.
Re: Error when i play arma 3, need to know how to downgrade driver.
I'm having the same problem man and it's a pain, I don't know how to do this I just want to play the game! we need help please! anyone!
View ArticleRe: SPI.setClockDivider and mraa_spi_frequency does not have an effect?
Since there was some updates today and it looked like SPI was involved I hoped things magically sped up. So far I don't see any speedups. Looking at the Logic Analyzer timings still showed that the...
View ArticleRe: How best proceed with overheating i7-4790K?
Hello , i have intel i7 4790k and GIGABYTE GA-Z97X-UD3H , i make test stress on prime95 vers 28.5 during 10 minutes after i seen on cpu-z the core voltage is 1.430v , in bios all is default , how can...
View ArticleRe: S2600CP4 in OEM case, BMC force update enabled, bmc.nsh fails with an...
The BMC force update was already enabled by moving the jumper from position into position 2-3. An update with the earliest available BMC firmware was already attempted and failed. Thank you. I will now...
View ArticleAsk how to discover localhost (127.0.0.1) in Raid Web Console 2
I have problem to discover host in RAID web Console 2, My server is Intel® Server Board S5520HCT are include in valid for the product(s) listed in software requierements, but when acces to 127.0.0.1...
View ArticleAsk how to discover localhost (127.0.0.1) in Raid Web Console 2
I have problem to discover host in RAID web Console 2, My server is Intel® Server Board S5520HCT are include in valid for the product(s) listed in software requierements, but when acces to 127.0.0.1...
View ArticleRe: Support for the Adafruit 2.8" TFT display for Arduino Edison
KurtE, I bought one of those Galileo boards some time ago, I dont know if the Gen2 has changed anything since then. When i get a board the first think i do for a test is to try out the SIP...
View ArticleRe: How to have Edison reconnect to WiFi automatically?
Thanks Fab-Lab,That's a very useful document you wrote there.I'll get my Edison upgrade to build 68.
View ArticleAsk how to discover localhost (127.0.0.1) in Raid Web Console 2
I have problem to discover host in RAID web Console 2, I downloaded from https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18440, My server is Intel® Server Board S5520HCT are include in valid...
View ArticleRe: NUC3815TYKE ACPI_BIOS_ERROR after using asl /loadtable on ssdt
Hi, Further to my reply above, I flashed the NUC with BIOS version 0032, but it has the same ACPI_BIOS_ERROR error on boot, once the TESTSIGNING ON boot option is set. Mark
View ArticleClik here to view.
Yellow Screen
I connected my laptop (Windows 8.1) to a boardroom Projector and on completion disconnected by unplugging the cable without closing the presentation. If I now connect to a second monitor, the second...
View ArticleRe: Serial config support : Serial1.begin( 115200, SERIAL_8N2);
Hey Guy,could you explain meaning of below syntax system("stty -F /dev/ttyS0 9600 cs8 -parenb cstopb");if i want to use baud speed at 230400 ,8 ,parity: E ,stop bit:1how to setupThank youSittipong N.
View ArticleRe: (Intel Smart Connect) Remote Wake Grayed Out
There are 2 chipset drivers available: 1. In the latest D54250WY NUC bundle there is the chipset driver version 10.0.14 from 2014-03-26 -...
View ArticleRe: 17.1.0 wifi adapter disabled after sleep
I managed to resolve my issue of the adapter not working after being woken up from sleep. I had to disable fast start-up in my power settings on Windows 8.1, running drivers 17.1.0 from the intel...
View ArticleRe: Blink example is misleading
I loaded the Windows version of the drivers and the Arduino IDE an got a lot farther: - yes there is another UART ( guessing that there are actually 3), my cables are good, so I'm guessing that my USB...
View ArticleRe: BIOS Updating DH61CR - From 0044 to 0120
Thanks, Sylvia! My PC returns!! Congrats!But, I don't know what happend. Now I can't acess the BIOS SETUP. The BIOS doesn't awnser the commands F2, F7 and F10 and goes directly to Windows... Throught...
View ArticleRe: Intel AC7260 limited access after sleep
I've tried all of those steps. Card connects for 30 sec. ~ 1 minute then dies. Throughput rates are comparable (while connected) to an old BG card. Who's writing your drivers and doing the hardware?...
View Articlei have an i3-2100 cpu processor version 6.1, how to i update it?
I have no idea what to upgrade it to, every time I download something from the intel website it says I do not meet system requirements. I need help as soon as possible please!
View Article