Re: D2500CC, how do I set mac address in DOS or BIOS???
PowerFlower, The MAC address for the primary LAN port is indeed stored in the BIOS flash (for secondary LAN/WLAN interfaces, though, EEPROMs are typically used). We program the MAC Address into the...
View ArticleClik here to view.
Re: Will wearables steal the show at CES 2014?
I got a Pebble for Christmas, the tech is pretty basic but it is making me more productive getting notifications sooner. I'm only a couple weeks in to the "trial" but so far I love it. Excited to see...
View ArticleRe: getting started: monitor shell?
OK, I figured Ethernet would work, but wasn't sure how to figure out the IP address without some shell running, at least for the first time. I'll read the thread, or resort to the serial interface. I...
View ArticleWhat is the correct link for software downloads?
alileThis link is incorrect:https://communities.intel.com/community/makers/software/drivers This link is correct:https://communities.intel.com/community/makers/drivers
View ArticleRe: Problem with HDMI audio using intel hd 4600 graphics
Noticed that when my Home Theater is off, the sound panel detects my TV, as soon as I turn it on it disappears. When I turn it off again the TV appears back. This is an Emotiva UMC-200 Home Theater...
View ArticleRe: laptop dell i7 issue
That is a valid troubleshooting step too…I would escalate the issue with the system manufacturer.
View ArticleRe: Support for SSL connections through Wi-Fi
Hi OzzieG, I believe you can set up an SSL connection on the Galileo via Linux. I’m not sure if it’s supported though a sketch. Regards,Intel_JEspinoza
View ArticleRe: 530 SSD freezes & kills computer after a few minutes?
I do not think so; the drive does not appear in BIOS after a system restart.I believe the best chance is to update the BIOS.
View ArticleRe: Need Clarification Regarding Socket Types
Hi, Not sure if this helps but....You need 1st to pay attention to socket supported. The package size will be in line with the socket. The i3-330m only works in g1 (rPGA988A) sockets but as to your...
View ArticleRe: BIOS recovery not working
I am having the same problem I googled this problem and found no solution to it. Couple of other people also posted the same problem on intel community and still there problem hasn't been solved.
View ArticleSystem is in manufacturing mode
Dear All: The BIOS screen on a DG41TY board is showing the following message: System is in manufacturing mode. The BIOS is current, but I reloaded the BIOS just in case it was corrupted. The message is...
View ArticleRe: getting started: monitor shell?
Not related to this topic. I'm trying to figure out how to compile / download code now. Is there cc/gcc cross-compile, or do I have to do everything through the Arduino IDE? Only just starting to...
View Articlegetting started: programming options
What are the options for compiling code? e.g. a simple helloworld.c application, does that have to be built using the Arduino IDE, or is there a cc/gcc cross-compile option? (Note I'm using the Linux...
View ArticleRe: Stand-alone SCS or integration with SCCM? Both?
Yes you are able to setup an SCS server separately. Then at a later time use the SCS Add-on to integrate it into SCCM. It's absolutely possible to have full AMT functionality without using...
View ArticleRemoval of SAS R5 from RSTe....does ESRT2 EFI Boot?
Hello, I had previously offered the RKSAS4R5 as a software RAID 5 option for SAS disks. RSTe has been the preferred configuration because firstly it supports EFI boot and secondly I could pre-install...
View ArticleInstalling an RS232 Shield (cutedigi)
Hi All, I installed an RS232 Shield from Cutedigi on my Galileo Board (on Intel's list of compatible shields), then attempted to connect my Galileo to an older terminal from which I would like to...
View ArticleRe: Serial Communication with Arduino Shields
Thanks, I poked around and found that different arduino boards map the Serial, Serial1, Serial2 etc, software syntax to different physical serial ports on the boards. It looks like the Galileo is...
View ArticleRe: Rapid Start vs Rapid Response vs Rapid Storage
According to the Rapid Start guide you've linked to, you can install both Rapid Start and Smart Response on the same system, as long as you install Smart Response BEFORE setting up Rapid Start. Is the...
View Article