Re: Bitbake Errors
@JamesBond I have been having same exact issue as you for last 3 days. Previously I had no issue, also restored my server from several backup to verify I didn't break my own recipe. Yocto check-in...
View ArticleRe: Start sketch from Linux
If I run "ps" I see a process whose name suggests to be connected to sketch reset button: 1311 root 768 S/opt/cln/galileo/galileo_sketch_reset -vand within its folder there is a...
View ArticleRe: Ping from galileo to computer not working
you can try:route add default gw xxx.xxx.xxx.xxx
View ArticleRe: Trouble with Bitstreaming Audio & Video Artifacts/Corruption with 3D...
Update: After updating to BIOS 0024, I have been able to play BD movies with HD-Audio bitstreams without encountering any HDMI handshaking issues with the caveat that I do not use Hardware Acceleration...
View ArticleRe: Ping from galileo to computer not working
Thanks guys!The ping works in both directions on Debian, but I still cannot access the Internet from the Galileo. I tried to make my PC as a router with the command: sysctl net.ipv4.ip_forward=1and I...
View ArticleRe: RSTe & VMware
This is new to me. But the description says "The RSTE driver supports products based on Intel Patsburg SAS Storage Control", so I wonder if it will work on the SATA RSTe of S1200V3RPS/L.
View ArticleS3210/S3200SH strange behaviour
I recently got an old S3200/S3210 Board and it behaves kind of strange. Sometimes on start it beeps one time, then 2 times, also sometimes 3 times. Manual is just saying if it beeps 3 times, then...
View ArticleRe: DH87RL artifacts on boot screen
Hi Sylvia, Thank you for getting back to me. I tested with an old Sony 1024x768 monitor and there were no issues.However the monitor that shows problems with the motherboard is a Dell 1920x1200,...
View ArticleRe: bois crashes problem
Did you have to perform a BIOS recovery to start the board again? Do you still have the exact error message you mentioned?
View Articledq87pg: ignore UEFI BootXXXX variables
Hello,Intel motherboard dq87pg ignore/corrupt all UEFI BootXXXX/BootOrder variables except last one set.So if you install Windows then Linux you've got in boot menu (F10) only Linux (grub) and if you...
View ArticleClik here to view.
Re: Intel SSD 530 NAND Write Problem
i testing tonight device sleep timing.intel530 have not bad timing but still erase nand
View ArticleServer 2012 R2 efi installation
Hi, I am currently trying to install windows 2012 R2 on an Intel S5520HC with a RS2BL080 Raid controller. I have 6 x 2TB drives configured in RAID 10 and due to the size of the array I have to use EFI...
View ArticleDisk Write Cache on board RAID ESRT II
I have seen demo videos on how to configure ERST II, is There anyone knows and explain more about DWC write cache, if they would set ON or OFF on onboard RAID support, if for instance on intel server...
View ArticleRe: Intel AC7260 problems
Ieventuallysolved the problemby buyingaUSBwifistick: http://www.tp-link.com/en/products/details/?categoryid=1683&model=TL-WDN4200
View Articlei7-4770R - Max. safe operating temp. for 24/7 use?
Hi, I have a system with an i7-4770R, running Windows 8.1 x64. The machine is a Gigabyte BRIX Pro When running CPU-intensive tasks (all cores 100%), temperature monitoring tools (HWiNFO, HWMonitor)...
View ArticleD3410WYK Power button no longer working
Dear All, Yesterday I was changing some BIOS settings (version #23) in an attempt to allow my NUC from being started using a remote. During the changing of the various parameters my wired keyboard...
View ArticleUsable RAM is less than the installed RAM?
I have Intel board DH77KC with 8 GB installed RAM. OS is Windows 8.1 32bit. The problem is when i check my computer properties, it shows "Installed RAM 8GB (Usable RAM 3.48GB).What it means?How can I...
View ArticleRe: Firmware 024 Haswell Nuc - still the same problems
@allan_intel,I am like others surprised by the position of Intel in response to the problems reported. Stating that Linux is not an operating system that is supported by the Intel hardware would be a...
View ArticleRe: DN2820FYK - No Video
Hello, I do have the same problem and bios 025 didn't change anything. My TV is panasonic 50ST50 wich is full HD. I installed my Openelec with another TV (Sony 32V5500) without problems and now on my...
View ArticleClik here to view.
Re: Firmware 024 Haswell Nuc - still the same problems
I'm experiencing the same problem with OpenElec.But if it's true that windows does not wake up after a few seconds wouldn't this mean thatthe Linux network driver is lacking some code needed to get it...
View Article