I just got my intel galileo..
did some reading about it and got the latest arduino IDE for galileo from the intel's website for the same.
Tried flashing blinky sketch... Nohing happens..
I am using a Gen2 board... the port shows up as tty.ACM0, when i try flashing the blinky, i get this following message
//-------------------------------------------------------------------
#
# Execute the target download command
#
#Download the file.
host_file_name=$2
"$fixed_path/lsz" --escape --binary --overwrite $host_file_name < $tty_port_id > $tty_port_id
Sending: Blink.cpp.elf
Bytes Sent: 1024/ 79248 BPS:574347 ETA 00:00
Bytes Sent: 9216/ 79248 BPS:3557072 ETA 00:00
Bytes Sent: 10240/ 79248 BPS:3541072 ETA 00:00
Bytes Sent: 11264/ 79248 BPS:3768717 ETA 00:00
Bytes Sent: 12288/ 79248 BPS:3995008 ETA 00:00
Bytes Sent: 13312/ 79248 BPS:4199667 ETA 00:00
Bytes Sent: 14336/ 79248 BPS:4405740 ETA 00:00
Bytes Sent: 15360/ 79248 BPS:4605698 ETA 00:00
Bytes Sent: 16384/ 79248 BPS:4800522 ETA 00:00
Bytes Sent: 17408/ 79248 BPS:5032702 ETA 00:00
Bytes Sent: 18432/ 79248 BPS:5263440 ETA 00:00
Bytes Sent: 19456/ 79248 BPS:5497835 ETA 00:00
Bytes Sent: 20480/ 79248 BPS:5730443 ETA 00:00
Bytes Sent: 21504/ 79248 BPS:5930714 ETA 00:00
Bytes Sent: 22528/ 79248 BPS:6074137 ETA 00:00
Bytes Sent: 23552/ 79248 BPS:6188325 ETA 00:00
Bytes Sent: 24576/ 79248 BPS:6309942 ETA 00:00
Bytes Sent: 25600/ 79248 BPS:6409633 ETA 00:00
Bytes Sent: 26624/ 79248 BPS:6506388 ETA 00:00
Bytes Sent: 27648/ 79248 BPS:6601999 ETA 00:00
Bytes Sent: 28672/ 79248 BPS:6688119 ETA 00:00
Bytes Sent: 29696/ 79248 BPS:6767770 ETA 00:00
Bytes Sent: 30720/ 79248 BPS:6851120 ETA 00:00
Bytes Sent: 31744/ 79248 BPS:6935666 ETA 00:00
Bytes Sent: 32768/ 79248 BPS:7010760 ETA 00:00
Bytes Sent: 33792/ 79248 BPS:7077141 ETA 00:00
Bytes Sent: 34816/ 79248 BPS:7149167 ETA 00:00
Bytes Sent: 35840/ 79248 BPS:7217392 ETA 00:00
Bytes Sent: 36864/ 79248 BPS:7284063 ETA 00:00
Bytes Sent: 37888/ 79248 BPS:7339789 ETA 00:00
Bytes Sent: 38912/ 79248 BPS:7400750 ETA 00:00
Bytes Sent: 39936/ 79248 BPS:7459196 ETA 00:00
Bytes Sent: 40960/ 79248 BPS:7517226 ETA 00:00
Bytes Sent: 41984/ 79248 BPS:7564810 ETA 00:00
Bytes Sent: 43008/ 79248 BPS:7614868 ETA 00:00
Bytes Sent: 44032/ 79248 BPS:7663219 ETA 00:00
Bytes Sent: 45056/ 79248 BPS:7711207 ETA 00:00
Bytes Sent: 46080/ 79248 BPS:7753892 ETA 00:00
Bytes Sent: 47104/ 79248 BPS:5372943 ETA 00:00
Bytes Sent: 48128/ 79248 BPS:5456211 ETA 00:00
Bytes Sent: 49152/ 79248 BPS:5548306 ETA 00:00
Bytes Sent: 50176/ 79248 BPS:5634629 ETA 00:00
Bytes Sent: 51200/ 79248 BPS:5723265 ETA 00:00
Bytes Sent: 52224/ 79248 BPS:5811709 ETA 00:00
Bytes Sent: 53248/ 79248 BPS:5898745 ETA 00:00
Bytes Sent: 54272/ 79248 BPS:5985151 ETA 00:00
Bytes Sent: 55296/ 79248 BPS:6070625 ETA 00:00
Bytes Sent: 56320/ 79248 BPS:6156616 ETA 00:00
Bytes Sent: 57344/ 79248 BPS:6240579 ETA 00:00
Bytes Sent: 58368/ 79248 BPS:6323143 ETA 00:00
Bytes Sent: 59392/ 79248 BPS:6405618 ETA 00:00
Bytes Sent: 60416/ 79248 BPS:4531366 ETA 00:00
Bytes Sent: 61440/ 79248 BPS:4524351 ETA 00:00
Bytes Sent: 62464/ 79248 BPS:4583502 ETA 00:00
Bytes Sent: 63488/ 79248 BPS:4610009 ETA 00:00
Bytes Sent: 64512/ 79248 BPS:4631524 ETA 00:00
Bytes Sent: 65536/ 79248 BPS:4653584 ETA 00:00
Bytes Sent: 66560/ 79248 BPS:4673522 ETA 00:00
Bytes Sent: 67584/ 79248 BPS:4684257 ETA 00:00
Bytes Sent: 68608/ 79248 BPS:4726411 ETA 00:00
Bytes Sent: 69632/ 79248 BPS:4730829 ETA 00:00
Bytes Sent: 70656/ 79248 BPS:4741112 ETA 00:00
Bytes Sent: 71680/ 79248 BPS:4781597 ETA 00:00
Bytes Sent: 72704/ 79248 BPS:4805349 ETA 00:00
Bytes Sent: 73728/ 79248 BPS:4441984 ETA 00:00
Bytes Sent: 74752/ 79248 BPS:4475648 ETA 00:00
Bytes Sent: 75776/ 79248 BPS:3224253 ETA 00:00
Bytes Sent: 76800/ 79248 BPS:3254256 ETA 00:00
Bytes Sent: 77824/ 79248 BPS:3088764 ETA 00:00
Bytes Sent: 78848/ 79248 BPS:3118134 ETA 00:00
Bytes Sent: 79248 BPS:1114225
Transfer complete
#
#mv the downloaded file to /sketch/sketch.elf
target_download_name="${host_file_name##*/}"
Moving downloaded file to /sketch/sketch.elf on target
echo "Moving downloaded file to /sketch/sketch.elf on target"
"$fixed_path/lsz" --escape -c "mv $target_download_name /sketch/sketch.elf; chmod +x /sketch/sketch.elf" < $tty_port_id > $tty_port_id
Transfer complete
#
#
//----------------------------------------------------------------------------------------------------------------------------------------
but nothing happens on the hardware... i tried another pin (10), and many others, but still nothing happens..
has anybody else faced the same issues?
using arduino1.5.3