Re: Suggestions on using audio speakers with Galileo
Hi ParidhiA few questionsAre you running AlexT's version of Yocto?If not, you should get it from http://alextgalileo.altervista.org/blog/updated-galileo-devtools-image/as Standard version lacks many...
View ArticleHow to Update My USB Driver ?
How can I update my USB drivers. I have USB 2.0 ports and they seem to be recognizing a few of my devices, but not my Zune & Ipod. If theres a program I need to download please let me know. Thanks!
View ArticleOpenCV and USB Camera with Intel Edison
Hello, I have the Arduino Intel Edison board, and I was wondering how a USB Camera was suppose to be connected? It doesn't power up when plugged into the USB port. In addition, how are the drivers...
View ArticleRe: Intel XTU 5.1.1.25 stuck at splash screen
Hopefully we will add the ability to install Intel® XTU on non-unlocked systems with the next release. Our engineering department is aware about this request.You may use the Intel® Processor Diagnostic...
View ArticleRe: Bios Update Intel DQ45CB Motherboard
Allan I tried to update it but I could not get to the Successful installation screen until I did a reboot. Then I checked the Bios again and it was still showing the same number (0059) and the ME...
View ArticleWindows has stopped this device because it has reported problems. (Code 43)
When I follow the getting started guide and plug the first usb cable in, it says I should wait a few seconds (30 or so) and I should see the Edison show up as a device similar to how an SD card would...
View ArticleRe: Repowering the Edison After Pushbutton Shutdown
Hey mweal, Is it possible for you to post some pictures of your custom board? Which software did you use to design it? Is it 2 or 4 layers? I would like to get started soon to make my own board for the...
View ArticleRe: WiDi Issue
Hi Jonathan,Thanks for your message. I previously tried the WiDi Update Tool, the update seemed successful but with the update my Belkin was not even recognized. I then restored to a point before the...
View ArticleClik here to view.
Re: Edison Bricked
These are the same USB cables as the previous board.This board was a little bit different. On the other board, I tried to install ubilinux while it was on this big breakout board, while this one was on...
View ArticleRe: Secure boot / signed firmware
Hello drzvan, The Edison uses Das U-boot, so I believe it can't use secure boot, because it is a feature of UEFI, but it can use verified boot as a form of secure boot, why don't you rake a look at the...
View ArticleRe: Motor driver Conrad-Miniatur-Fahrtenregler not working with intel galileo
hi, i was able to solve this issue i just used 5v from my galileo and readjusted the powersource to 12 volts and it started working so the above code is correct RegardsAnnu shah
View ArticleRe: rste uninstall
David, The server is a Lenovo TS440 with one single processor (Intel Xeon CPU E3-1245 v3 @ 3.40 GHz (8cores)) and Intel(R) C600+/C220+series chipset SATA RAID Controller. 16GB or RAM. 4 500GB SATA...
View ArticleRe: SPI + Edison Mini breakout board + MRAA on IoT devkit
Hi LuigiC Were you able to use SPI successfully? Regards;CMata
View ArticleRe: Suggestions on using audio speakers with Galileo
hi rgb, Thanks a lot for your suggestion. espeak is now working fine with the Alex's version of image. I just want to confirm that this image does not work with Arduino is it? --Paridhi
View ArticleRe: I am trying to install the MEI driver for my system.
Thanks a lot guys. Reinstalling the OS worked.
View ArticleRe: Intel Galileo 1 unidentified component half-broken
I don't have the ability to open the board design files but it looks to me like the 32KHZ crystal http://www.mouser.com/ds/2/137/1697497-472682.pdfI am sure that is used for the RTC. While there would...
View ArticleRe: Intel Edison and 4G/LTE modem?
Hi No unfortunately not... still waiting for some other solution to come up.May be Qualcomm would make available board for their new Cargo project or Intel with Arduino will get new shield... it is...
View ArticleClik here to view.
Re: [bug] DN2820FYKH will not deactivate IR in BIOS
Hi all, Apologies for the confusion. The original report in this thread was: "I deactivated the NUC's consumer IR interface in the BIOS (vers. 0047). But the NUC still comes on when the Philips' on/off...
View Article